@article { author = {Ahmed, Anwar and . Sulyman, Ebtahag}, title = {Improving Mechanical and Thermal Properties for Unsaturated Polyester Resin by Adding Sisal Fibers}, journal = {College Of Basic Education Research Journal}, volume = {19}, number = {1}, pages = {781-804}, year = {2023}, publisher = {Mosul University}, issn = {1992-7452}, eissn = {2664-2808}, doi = {10.33899/berj.2023.178138}, abstract = {          In this paper, polymeric compounds were prepared from unsaturated polyester as a base material with sisal fibres with different weight percentages (1%, 2%, 3%, 4%, 5%) as a reinforcing material. After comparing the unsaturated polyester before and after reinforcement of the prepared compounds, it was found that there is an increase in the values ​​of mechanical properties (Hardness strength, Compressive strength, Tensile strength, Impact strength) when reinforced by weight (4%) at room temperature; however, when treated at temperatures  (8.55) ℃, it was found that the hardness, compressive and tensile strength decrease when heat treatment is at (8.55) ° C,  the impact strength increases at higher temperatures and decreases at lower temperatures. It was also found that the thermal conductivity decreased at all temperatures (8.55)℃, which indicates that the polymeric composites consisting of unsaturated polyester resin reinforced with Nylon 66 are good heat insulators.}, keywords = {unsaturated polyester resin,sisal fibers,Hardness strength,compressive strength,Impact strength,thermal conductivity}, title_ar = {تحسین الخواص المیکانیکیة والحراریة لراتنج البولی استر غیر المشبع باضاقة الیاف السیزال}, abstract_ar = {فی هذا البحث، تم تحضیر المرکبات البولیمریة من البولی استر غیر المشبع کمادة أساس مع الیاف السیزال بنسب وزنیة مختلفة (1%،2%،3%،4%،5%)کمادة تقویة. وبعد مقارنة البولی استر غیر المشبع قبل وبعد التدعیم للمرکبات المحضرة وجد ان هنالک زیادة فی قیم الخواص المیکانیکیة (مقاومة الصلادة والانضغاطیة والشد والصدمة). وبعد عملیة التقویة بالبولی استر غیر المشبع عند درجة حرارة 25ºم ووجد  ان النسبة الوزنیة التی تزداد فیها الخواص المیکانیکیة هی 4% وعند المعالجة عند الدرجات الحراریة (8،55) ºم وجد ان  قوة  الصلادة ، والانضغاطیة والمرونة تقل عند المعالجة الحراریة عند (8،55) ºم ولکن مقاومة الصدمة تزداد عند ارتفاع درجات الحرارة وتنخفض عند درجة الحرارة المنخفضة. کما وجد أن الموصلیة الحراریة انخفضت عند جمیع درجات الحرارة (8،55) ºم ، مما یدل على أن المرکبات البولیمریة المکونة من راتنجات البولی أستر غیر المشبع المقواة بالیاف السیزال هی عوازل حراریة جیدة}, keywords_ar = {}, url = {https://berj.mosuljournals.com/article_178138.html}, eprint = {https://berj.mosuljournals.com/article_178138_a3ffc4cdc69475a5bd432cbad8b1f769.pdf} }